vivi@sento.com.cn
0086-13929938149
Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
Faucets are an important tool for household water use, and installing faucets is also a laborious project. Many owners choose to install wall-mounted faucets. So is the wall-mounted faucet good? How to install the wall-mounted faucet?
The wall-mounted installation actually refers to concealed installation, that is, the water supply pipe fittings of the faucet are buried in the wall, and only one faucet and switch can be seen on the surface. Wall-mounted faucets generally save space, and can enhance the decoration of the entire bathroom space, making the bathroom space tidier.
It belongs to the automatic induction control switch. When using, the handle or the water container is put into the induction range, and the faucet will automatically discharge water, and the water discharge will be stopped after it is separated, and the water saving function is obvious.
Buying a wall-mounted faucet is generally more space-saving than ordinary faucets, and it can also improve the decoration of the entire bathroom space, making the bathroom space tidier.
When in use, the switch is automatically completed by the sensor, and people do not need to touch the faucet, which is beneficial to prevent bacterial infection.
It can be seen from the above that the overall advantages of wall-mounted faucets outweigh the disadvantages. If there are households who need to install in-wall faucets, you can refer to the installation steps:
Prepare installation tools and faucet parts, and check whether the supporting parts are complete. Common accessories include: hoses, rubber washers, kidnappers, drains, showers, decorative caps, etc.
Rinse with water before installation to remove sediment and impurities in the water pipe. The debris in the installation hole and the debris in the accessories need to be cleaned up to avoid clogging or wear to the ceramic valve core.
When taking over, it should be noted that the left side is hot water and the right side is cold water, the distance between the two pipes is 10-20cm, first fix the position of the water inlet joint, then remove the faucet, and install the faucet after the wall plastering is completed. scratches or wear.
When it is found that there is a distance between the angle valve and the water pipe on the faucet, it is necessary to purchase a special extension pipe to connect it. If other unprofessional water pipes are used for connection, when the water pressure is high, it is easy to fall off and leak water, causing great damage. trouble and loss. If the water inlet pipe is longer than the water outlet pipe, it can be cut off, and if the angle is not suitable, it can be bent moderately.
Before pre-embedding the valve core of the faucet into the wall, pay attention to the thickness of the wall, the wall is too thin to be buried. When the valve core is embedded, the plastic protective cover of the valve core should not be removed easily, so as to avoid cement and other debris damage to the valve core when the valve core is embedded.
In addition, when pre-embedding the spool, pay attention to the up and down, left and right directions of the spool to avoid burying the spool incorrectly. If the size of the wall outlet faucet deviates when the water inlet pipe is pre-buried, it can be corrected by adjusting the abductor.
For more information about faucet control valve,bathroom sink faucet valve,hot water sink valve, please kindly contact us at any time, we are glad to answer for you. If you want to order in quantity, hope that we will be your best choice.
